How to Keep a Mechanical Watch Running for Years: A Practical Guide

If you are a watch enthusiast, then you probably have a couple of mechanical watches in your collection.

Furthermore, there is a good chance that you will have spent a significant amount of money procuring an expensive watch for yourself.

All in all, you have plenty of motivation to keep your watch working smoothly for as long as possible.

The good news is that it is possible to keep your watch intact.

Of course, this is as long as you take the necessary steps to care for your watch.

If you are curious to discover what these tips and tricks are, you can find all the information that you need right here:

Be Aware of the Limitations of Your Watch

There is no denying that newer mechanical watches have been designed to be slightly harder.

As such, they may have greater water resistance or be equipped with a stronger crystal.

Regardless, these timepieces aren’t impervious to damage.

Thus, your first order of business is to carefully go through all the features of your model.

This isn’t just to discover the strengths of the device, but also the weaknesses.

Make sure that you adhere to the instructions that have been given by the manufacturer.

Also, be aware that all outer surfaces of a timepiece can deteriorate after some time.

This means that casings can weaken or other components can become brittle.

Due to this, you shouldn’t presume that a particular make and model will continue to have the same strengths several years after you have bought it.

Wind Your Watch as Needed

As you are well aware, mechanical watches need to be wound now and then.

The exact time for this will vary from one model to the next.

Nevertheless, it is important to stay on top of this.

Now, you need to be quite careful when winding your watch. Use too much force or do it incorrectly and you may end up damaging it.

Before you undertake this task, make sure to read a dedicated site such as Wrist Watch Pro to determine the right way to do this.

So, what does winding your watch regularly have to do with keeping it running properly for longer?

Well, when you wind your mechanical watch as needed, the mainspring is kept tight and the watch can enjoy optimal performance.

As a result, it loses the least amount of time possible.

Clean It Daily

Be honest: how often do you clean your watch?

Most people will never really clean their timepieces unless a smudge disrupts their view of the time.

This, however, isn’t conducive to a long-lasting watch.

If you wear your watch every day, you should get into the habit of cleaning it as well.

You don’t have to do anything drastic.

Wipe down the crystal and the band with a soft, dry cloth.

Make it a point to clean the portion where the glass meets the metal as dirt can accumulate here.

Taking on this task doesn’t just help to keep your watch looking good.

This level of care also reduces the likelihood of dirt or dust getting into the mechanical components of the watch.

As you can imagine, it will be quite difficult to clean out any dirt that may get into these crevices.

Watch Out for Magnetization

Consider how much time you spend around electronic devices and household appliances.

In this modern age, it is impossible not to interact with one of these devices.

However, whenever you approach one of these, you are unwittingly magnetizing your watch!

When the metal pieces inside the watch become magnetized, your watch stops becoming accurate.

You will know that your watch has become magnetized when it runs several minutes too fast each day.

If you have a compass lying around, simply hover the watch over the compass.

If the compass begins spinning, this is a sure sign that the watch is magnetized.

Several devices can correct this issue for you.

Nevertheless, it is best to let a professional handle the situation.

This is especially true if you have a rare or expensive timepiece and can’t afford to damage it in any way.

Store It Carefully

Where do you keep your watch at home?

If you tend to discard it on your bedside table, you need to re-think your actions.

It is important to keep your watch stored safely so that there is no chance of it incurring any damage.

Try to keep it in a cool, dry place with a soft cushion.

Avoid spots that may contain moisture as this can seep into the mechanical components of your watch.

If your timepiece is quite valuable, you may want to consider getting a safe for it.

Get It Serviced

Perhaps one of the best ways to keep your watch in excellent running condition for years is to get it serviced.

If you are wondering how often you need to take your watch into the store, there isn’t a set period.

More often than not, a manufacturer will provide you with guidelines for how often your timepiece needs to be serviced.

This is typically every four to five years.

Nevertheless, you shouldn’t always wait until this period is up until you get your watch serviced.

If you feel there is something wrong with your watch, then take it in.

This is especially true if moisture has settled beneath the crystal.

Or, if you feel as though loose components are rattling around.

In such instances, it is far better to be safe than sorry.

If you get your watch checked out instantly, you can prevent further damage from being done and correct any fault in it.

These are all the ways you can keep your mechanical watches running for years.

Thus, if you already have one or are thinking of investing in a good model, you need to keep this information in mind.

You will then be able to make your investment last for quite a while.